diff options
| -rw-r--r-- | flake.nix | 8 | ||||
| -rw-r--r-- | hosts/default.nix | 12 | ||||
| -rw-r--r-- | hosts/nixpad/configuration.nix | 149 | ||||
| -rw-r--r-- | hosts/nixpad/hardware-configuration.nix | 40 |
4 files changed, 209 insertions, 0 deletions
@@ -82,6 +82,14 @@ ./homes/floppydisk ]; }; + "floppydisk@nixpad" = home-manager.lib.homeManagerConfiguration { + pkgs = nixpkgs.legacyPackages.x86_64-linux; # Home-manager requires 'pkgs' instance + extraSpecialArgs = {inherit inputs outputs;}; + modules = [ + # > Our main home-manager configuration file < + ./homes/floppydisk + ]; + }; }; }; } diff --git a/hosts/default.nix b/hosts/default.nix index 36a8b85..e12b1f6 100644 --- a/hosts/default.nix +++ b/hosts/default.nix @@ -20,4 +20,16 @@ in { homes ]; }; + + nixpad = nixpkgs.lib.nixosSystem { + specialArgs = {inherit inputs outputs;}; + modules = [ + # this list defines which files will be imported to be used as "modules" in the system config + ./nixpad/configuration.nix + + # use the nixos-module for home-manager + home-manager + homes + ]; + }; } diff --git a/hosts/nixpad/configuration.nix b/hosts/nixpad/configuration.nix new file mode 100644 index 0000000..2c34f19 --- /dev/null +++ b/hosts/nixpad/configuration.nix @@ -0,0 +1,149 @@ +# Edit this configuration file to define what should be installed on +# your system. Help is available in the configuration.nix(5) man page +# and in the NixOS manual (accessible by running ‘nixos-help’). + +{ + config, + pkgs, + ... +}: { + imports = [ + # Include the results of the hardware scan. + ./hardware-configuration.nix + ]; + + # Bootloader. + boot.loader.systemd-boot.enable = true; + boot.loader.efi.canTouchEfiVariables = true; + boot.loader.efi.efiSysMountPoint = "/boot/efi"; + + networking.hostName = "nixpad"; # Define your hostname. + # networking.wireless.enable = true; # Enables wireless support via wpa_supplicant. + + # Configure network proxy if necessary + # networking.proxy.default = "http://user:password@proxy:port/"; + # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain"; + + # Enable networking + networking.networkmanager.enable = true; + + # Set your time zone. + time.timeZone = "Europe/London"; + + # Select internationalisation properties. + i18n.defaultLocale = "en_GB.UTF-8"; + + i18n.extraLocaleSettings = { + LC_ADDRESS = "en_GB.UTF-8"; + LC_IDENTIFICATION = "en_GB.UTF-8"; + LC_MEASUREMENT = "en_GB.UTF-8"; + LC_MONETARY = "en_GB.UTF-8"; + LC_NAME = "en_GB.UTF-8"; + LC_NUMERIC = "en_GB.UTF-8"; + LC_PAPER = "en_GB.UTF-8"; + LC_TELEPHONE = "en_GB.UTF-8"; + LC_TIME = "en_GB.UTF-8"; + }; + + # Enable the X11 windowing system. + services.xserver.enable = true; + + # Enable the KDE Plasma Desktop Environment. + services.xserver.displayManager.sddm.enable = true; + services.xserver.desktopManager.plasma5.enable = true; + + # Configure keymap in X11 + services.xserver = { + layout = "us"; + xkbVariant = ""; + }; + + # Enable experimental features + nix.settings.extra-experimental-features = ["flakes" "nix-command"]; + + # Enable CUPS to print documents. + services.printing.enable = true; + + # Enable sound with pipewire. + sound.enable = true; + hardware.pulseaudio.enable = false; + security.rtkit.enable = true; + services.pipewire = { + enable = true; + alsa.enable = true; + alsa.support32Bit = true; + pulse.enable = true; + # If you want to use JACK applications, uncomment this + #jack.enable = true; + + # use the example session manager (no others are packaged yet so this is enabled by default, + # no need to redefine it in your config for now) + #media-session.enable = true; + }; + + services.xserver.videoDrivers = ["intel"]; + hardware.opengl.driSupport32Bit = true; + + + # Enable touchpad support (enabled default in most desktopManager). + services.xserver.libinput.enable = true; + + # Define a user account. Don't forget to set a password with ‘passwd’. + users.users.floppydisk = { + isNormalUser = true; + description = "Frankie B."; + extraGroups = [ "networkmanager" "wheel" ]; + packages = with pkgs; [ + firefox + kate + ]; + initialPassword = "changeme"; + shell = pkgs.fish; + }; + + # Allow unfree packages + nixpkgs.config.allowUnfree = true; + + # List packages installed in system profile. To search, run: + # $ nix search wget + environment.systemPackages = with pkgs; [ + vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default. + wget + git + gnupg + pinentry + nerdfonts + jetbrains-mono + kitty + ]; + + programs.fish.enable = true; + + # Some programs need SUID wrappers, can be configured further or are + # started in user sessions. + # programs.mtr.enable = true; + programs.gnupg.agent = { + enable = true; + enableSSHSupport = true; + }; + + # List services that you want to enable: + + # Enable the OpenSSH daemon. + services.openssh.enable = true; + + # Open ports in the firewall. + # networking.firewall.allowedTCPPorts = [ ... ]; + # networking.firewall.allowedUDPPorts = [ ... ]; + # Or disable the firewall altogether. + networking.firewall.enable = false; + + # This value determines the NixOS release from which the default + # settings for stateful data, like file locations and database versions + # on your system were taken. It‘s perfectly fine and recommended to leave + # this value at the release version of the first install of this system. + # Before changing this value read the documentation for this option + # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html). + system.stateVersion = "22.11"; # Did you read the comment? + +} diff --git a/hosts/nixpad/hardware-configuration.nix b/hosts/nixpad/hardware-configuration.nix new file mode 100644 index 0000000..e326b0c --- /dev/null +++ b/hosts/nixpad/hardware-configuration.nix @@ -0,0 +1,40 @@ +# Do not modify this file! It was generated by ‘nixos-generate-config’ +# and may be overwritten by future invocations. Please make changes +# to /etc/nixos/configuration.nix instead. +{ config, lib, pkgs, modulesPath, ... }: + +{ + imports = + [ (modulesPath + "/installer/scan/not-detected.nix") + ]; + + boot.initrd.availableKernelModules = [ "xhci_pci" "ehci_pci" "ata_piix" "usb_storage" "sd_mod" "sdhci_pci" ]; + boot.initrd.kernelModules = [ ]; + boot.kernelModules = [ "kvm-intel" ]; + boot.extraModulePackages = [ ]; + + fileSystems."/" = + { device = "/dev/disk/by-uuid/79fd353d-4e05-44fd-9e10-e57b08c140f0"; + fsType = "ext4"; + }; + + fileSystems."/boot/efi" = + { device = "/dev/disk/by-uuid/AA53-B6CE"; + fsType = "vfat"; + }; + + swapDevices = + [ { device = "/dev/disk/by-uuid/92e64b37-f558-4333-bfb0-0e4bfe6e91c0"; } + ]; + + # Enables DHCP on each ethernet and wireless interface. In case of scripted networking + # (the default) this is the recommended approach. When using systemd-networkd it's + # still possible to use this option, but it's recommended to use it in conjunction + # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`. + networking.useDHCP = lib.mkDefault true; + # networking.interfaces.enp0s25.useDHCP = lib.mkDefault true; + # networking.interfaces.wlp3s0.useDHCP = lib.mkDefault true; + + nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux"; + hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware; +} |